Lithium triethylborohydride

Lithium triethylborohydride
Identifiers
CAS number 22560-16-3 Y
PubChem 2723993
ChemSpider 2006168 Y
Jmol-3D images Image 1
Properties
Molecular formula Li(C2H5)3BH
Molar mass 105.95 g/mol
Appearance Colorless to yellow liquid
Density 0.890 g/cm3, liquid
Boiling point

66 °C for THF

Solubility in water reactive
Hazards
R-phrases 11-14/15-19-34
S-phrases 16-26-33-36/37/39-43-45
Main hazards highly flammable
corrosive
Causes burns
Probable Carcinogen
NFPA 704
2
3
2
W
Related compounds
Related hydride sodium borohydride
sodium hydride
lithium aluminium hydride
 Y (verify) (what is: Y/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Lithium triethylborohydride (LiEt3BH), commonly abbreviated to LiTEBH or Superhydride, is a powerful and selective reducing agent used in inorganic and organic chemistry. LiTEBH is far more powerful than lithium borohydride and more powerful than lithium aluminium hydride (LAH) in many cases. One of the main advantages of LiTEBH is that it is safer than LAH.

LiTEBH rapidly reduces:

  1. Aldehydes, ketones, acid chlorides and esters to alcohols
  2. Lactones to diols
  3. Acid anhydrides to alcohols
  4. α,β-enones by 1,4-addition to give lithium enolates
  5. Disulfides to thiols
  6. Tertiary amides to an alcohol

Contents

History

Compounds of lithium hydride and sodium hydride with trialkylboranes such as LiTEBH were first discovered in the course of War Research in the period of 1942-45 at the University of Chicago by Professor H.C. Brown and Professor H.I. Schlesinger.[1]

Preparation

LiTEBH is most commonly produced by the reaction between lithium hydride (LiH) and triethylborane (Et3B) in tetrahydrofuran (THF)

LiH + Et3B → LiEt3BH

which gives a very high yield of approximately 99%. The subsequent solution is collected by filtration of any excess LiH to give a crystal clear solution. LiTEBH in THF has appeared to be stable indefinitely under an inert atmosphere.

Structure and chemical properties

The structure of LiTEBH causes the compound to be a very strong hydride source. Hydrogen is more electronegative than boron which causes the B-H bond to be strongly polarized with boron having a partial positive charge and hydrogen having a partial negative charge. The ethyl groups on the boron also aids to this abnormal polarizability by removing additional electron density from the boron making it even more electropositive. This polarization of the B-Et and B-H bonds causes the hydrogen to be in the (-I) oxidation state instead of its usual (+I) oxidation state which leads to its high reactivity with atoms that can accept electrons to allow the hydrogen to go to its (+I) oxidation state.

Uses

Aldehydes and ketones rapidly utilizes 1 equivalent of LiTEBH to form the alcohol shown respectively in (1) and (2).

LiTEBH can be used to form the alcohol even when these compounds possess sterically hindered substituents as shown with 2,2,4,4-tetramethyl-3-pentanone in (3).

Esters and lactones rapidly take up 2 equivalents of LiTEBH, undergoing reduction to the alcohol and diol groups respectively. The example shown below involves the reduction of γ-butyrolactone to 1,4-butanediol which formed in a 94% yield in (4).[2]

The opening of the epoxide ring with LiTEBH proceeds with exceptional regio- and stereo- selectivity, yielding only the Markovnikov alcohol.[2] The example shown below is of 1,2-epoxybutane being reduced to give 1-methylcyclohexanol in (5).

The acetal and ketal will not be reduced by LiTEBH. LiTEBH can be used in the reductive cleavage of mesylates and tosylates.[3] LiTEBH can selectively deprotect tertiary N-acyl groups without affecting secondary amide functionality.[4] LiTEBH has also shown high reactivity toward ester groups by the selective reduction of the ester group of aromatic carboxylic acids to alcohols as shown in (6) and (7).[2]

LiTEBH can also effectively reduce pyridine and isoquinolines to piperidines and tetrahydroisoquinolines respectively.[5]
The reduction of β-hydroxysulfinyl imines with catecholborane and LiTEBH produces anti-1,3-amino alcohols shown in (8).[6]

Precautions

LiTEBH reacts violently and exothermically with water, alcohols, or acids releasing flammable hydrogen gas which can ignite explosively and the pyrophoric triethylborane vapor can ignite spontaneously. It can cause severe eye, skin, and respiratory tract burns.

References

  1. ^ Krishnamurthy, S. Aldrichim. Acta. 1974, 7, 55.
  2. ^ Brown, H.C.; Kim, S.C.; Krishnamurthy, S. J. Org. Chem. 1980, 45, 1-12.
  3. ^ Baer, H.H.; Mekarska-Falicki, M. Can. J. Chem. 1985, 63, 3043.
  4. ^ Tanaka, H.; Ogasawara, K. Tetrahedron Lett. 2002, 43, 4417.
  5. ^ Blough, B.E.; Carroll, F.I. Tetrahedron Lett. 1993, 34, 7239.
  6. ^ Kochi, T; Tang, T.P.; Ellman, J.A. J. Am. Chem. Soc. 2002, 124, 6518.

External links